rudder trim Archive - Cockpit Concept

HS TX AC Backlight, LAN

cpaulus — Thu, 12 Sep 2024 12:33:59 +0000

This board makes it possible to connect original instruments based on the ARINC 429 High Speed Bus to the flight simulator via LAN. The board has a single transmitter unit and has been developed as a LAN version for the “ARINC 429 HS Transmitter, USB”. Instead of selecting a fixed profile as before, you can freely select the data you need and want to send from a list in the software. This means that several devices can be operated in parallel on the board without having to create a new special profile.

The board also has a generator for a 400 Hz alternating voltage, which can be varied between 0 and 5 V (RMS) via the software. The lighting of most devices can be operated with 5 V DC without any problems. However, some devices require an AC control voltage to operate and vary the lighting. These are the APE-5100 clock, the DCDU and the full-format printer (Widebody). Similar to other boards, the data source can be selected and a value table can be created for calibration. A total of three connections are available for the voltage (AC signal and ground).

Please note that the output power is only designed as a control voltage for the above-mentioned devices. The circuit board cannot be used to control incandescent lamps.

An external 5 volt power supply is required.

Der Beitrag HS TX AC Backlight, LAN erschien zuerst auf Cockpit Concept.

ARINC 429 HS Transmitter, USB

cpaulus — Tue, 08 Feb 2022 15:34:48 +0000

This board makes it possible to connect original instruments based on the ARINC 429 high speed bus to the flight simulator via USB. The board has a single transmitter unit.

Der Beitrag ARINC 429 HS Transmitter, USB erschien zuerst auf Cockpit Concept.

ARINC 429 LS Transceiver, USB

cpaulus — Mon, 21 Dec 2020 12:24:43 +0000

This board makes it possible to connect original instruments and devices based on the ARINC 429 low speed bus to the flight simulator via USB. The board has a transmitter and a receiver unit. For example, audio control panels, weather radar control panels, ECAM control panels, rudder trim displays, airspeed indicators, altimeters, VHF or ADF control panels can be controlled. Select your device and the target software in the software, everything else happens automatically.

Der Beitrag ARINC 429 LS Transceiver, USB erschien zuerst auf Cockpit Concept.